[product name] disposable suction tube kit

[specification and model] type I connector is horn head, and type II joint is dense cover horn head

[name of registrant] Henan Jianqi medical device Co., Ltd

[address] dingluan Industrial Zone, Changyuan County, Henan Province

[Tel.] 0373-8690789

[after sales service unit] Henan Jianqi medical equipment sales Co., Ltd

[name of manufacturer] Henan Jianqi Medical Equipment Co., Ltd

[address] dingluan Industrial Zone, Changyuan County, Henan Province

[production address] dingluan Industrial Zone, Changyuan County, Henan Province

[contact information] 0373-8690789

[production license] ysyjx production license No. 20080036

[Registration Certificate No.] yxzz No. 20182080543

[product performance] 1. Each component of the sputum suction tube set should be clean, free of foreign matters and impurities, and the sputum tube body should be evenly extruded without glue flow; the surface of each joint and accessories of the sputum suction tube should be clean and smooth without burr and injection molding flow. The surface of the melting head of the sputum suction tube is clean and smooth. 2. The distance between one side hole of sputum suction tube and the head end of tube body is 12 mm ± 1 mm, and the distance between holes is 12 mm ± 1 mm. There are 28 scales in total from 44mm ± 3mm at the head end of the tube body, and the scale spacing is 10mm ± 1mm. The handwriting is clear and not easy to fall off. 3. The tooth pad will not be deformed, broken or broken under the pressure of 50N ± 5N for 30s. 7. Medical absorbent gauze used for gauze performance shall meet the requirements of yy0331-2006 standard or provide product qualification and inspection report. 8. The breaking strength of bonded nonwovens used for wrapping shall meet the requirements of class a qualified products in FZ / t64004-1993, or the product qualification and inspection report shall be provided. 9. The heat sealing around the gloves shall be tight, and there shall be no adhesion in the fingertip space. The tensile strength of gloves shall not be less than 21MPa or product qualification and inspection report shall be provided. 10. Breaking strength: the joint of two tweezers can bear 15N tensile force, and there shall be no fracture within 15s. 11. Cytotoxicity should be no more than grade 1. The skin irritation was very mild, P Ⅱ value was 0-0.4. There should be no delayed hypersensitivity reaction. 13. If the sputum suction bag is sterilized with ethylene oxide, the ethylene oxide residue should be no more than 10 μ g / g.

[scope of application] it can be connected with vacuum negative pressure system or equipment for suction of sputum by respiratory tract.

[contraindications] no contraindications

[precautions] 1. This product is disposable and its package is damaged. It is forbidden to use it and destroy it after use.

2. The production batch number and expiration date are shown in the seal of the package, and the sterilization date is shown in the outer packing box.

3. This product is sterilized by ethylene oxide and has a sterility validity of two years.

[usage] 1. According to the patient's physical signs, select and configure the corresponding specification of sputum suction tube kit products;

2. Open the packaging bag, take out the sputum suction tube kit accessories, wear sterile gloves and place other accessories according to the regulations, and check whether the suction tube is tortuous or blocked;

3. One port of the sputum suction tube is connected with the suction machine interface, and the other end is placed in the position requiring sputum suction, and the operation is carried out according to the sputum suction nursing operation procedures;

4. After use, the sputum suction tube was pulled out and destroyed according to the requirements of the hospital or environmental protection.

[storage method] 1. The product should be loaded and transported in covered carriage and cabin, and kept clean. It should not be under heavy pressure, direct sunlight, rain or snow.

2. Handle with care to avoid violent collision;

3. The product should be stored away from the fire source, the relative humidity is not more than 80%, no corrosive gas and well ventilated and clean environment.