[product name] disposable nebulizer kit

[specification and model] model: ordinary type, atomization type, oxygen bag type, adjustable concentration type; specification: large, medium and small size

[name of registrant] Henan Jianqi medical device Co., Ltd

[residence] dingluan Industrial Zone, Changyuan County

[Tel.] 0373-8690789

[after sales service unit] Henan Jianqi medical equipment sales Co., Ltd

[name of manufacturer] Henan Jianqi Medical Equipment Co., Ltd

[residence] dingluan Industrial Zone, Changyuan County

[production address] dingluan Industrial Zone, Changyuan County

[contact information] 0373-8690789

[production license] ysyjx production license No. 20080036

[Registration Certificate No.] yxzz 20162660349

[technical requirements No.] yxzz 20162660349

[structure and composition] the product is composed of cover, bite (optional), atomizing cup, oxygen pipe and joint.

[product performance] 1. The cover shall be transparent, clean, free of impurities, intact and undamaged, and the part in contact with human face shall be soft and smooth. 2. The inspiratory resistance and expiratory resistance of adjustable concentration mask should not be greater than 350pa and 250pa respectively. 3. All parts of the mask shall be kept smooth after connection. 4. The joint length is 30mm ± 5mm. 5. The pipe body shall be resistant to bending, and the pipe body shall not be folded after being folded in half, and the ventilation shall be smooth. 6. Elastic band shall be used for headband, length ≥ 450mm, width ≥ 5mm. 7. The atomizer should be transparent. 8. The edge of oxygen bag should be tightly closed. 9. Adjustable concentration type mask adjusting head can rotate freely in the scale range. 9. The residual content of ethylene oxide should not be more than 10 μ g / g. 10. The product should be sterile.

[scope of application] it is used for atomization treatment of clinical patients.

[contraindications] no contraindications.

[precautions] 1. This product is disposable and its package is damaged. It is forbidden to use it and destroy it after use.

2. The production batch number is shown in the seal or certificate, and the sterilization date is shown in the outer packing box.

3. The product was sterilized by ethylene oxide.

[usage] 1. Select the specifications and models of the patients, and open the package after confirming that the outer package is in good condition.

2. After the mask is connected to the atomizer, the mask should cover the mouth and nose of the patient; the bite type mask should let the patient contain it directly in the mouth; the oxygen bag mask should open the expiratory hole and close the one-way stop valve when breathing out; the gas sampling port should be opened and the stop valve should be closed when exhausting; the adjustable concentration mask should adjust the adjustable valve according to the demand of drug concentration.

3. After the end of use, the product should be treated as medical waste to avoid pollution.

[storage method] 1. The product should be loaded and transported in covered carriage and cabin, and kept clean. It should not be under heavy pressure, direct sunlight, rain or snow.

2. Handle with care to avoid violent collision;

3. The product should be stored away from the fire source, the relative humidity is not more than 80%, no corrosive gas and well ventilated and clean environment.